Woodcon makes all sorts of wood waterproof and water-repellent with one simple application.
It helps prevent algae and moss growth. Its fire-retardant, without discoloring or changing the surface of the wood and its environmentally friendly. Woodcon forms a transparent water-repellent shield on every wood surface without giving it a glossy or wet look. It will never blister, crack or break off, it becomes a permanent part of the wood.
Depending on the porosity of the wood 1 liter is sufficient for 88 ft2
Woodcon leaves a water repellent coating on the wood. It forms a protective layer on the surface. It will nestle deep within and around the wood fibers. Therefore it will not peel, crack, flake or in anyway come loose from the surface of the wood. Woodcon stops and prevents wood fungus, algae and moss growth on the surface of the wood, while the intrusion of termites and woodworm is countered. It has a unique flame-retardant effect on wood. Woodcon extends the lifespan of wood by preserving it and making it water repellent.
How Woodcon works:
This unique formula called Woodcon, will cover the wood and will penetrate deep within the micro space of the wood surface. Since wood needs years to grow, we can state that it is one of our most precious building materials. We therefore treat it with our most expensive paints and coatings to counter water related destructive processes. However, such products only form a layer ON top of the wood, which will loosen, burst and bladder, and therefor will enable the water to access the surface again in time. Woodcon does not have any of these characteristics. Woodcon forms a permanent protective layer IN and ON the wood surface.
How Woodcon is used:
Apply Woodcon with a sponge, brush, synthetic paint roller or low pressure sprayer. Also a ordinary hand spray bottle or larger pump will do the trick. If available you could also use a professional high pressure sprayer for larger surface’s. Apply Woodcon (thin layer) on a surface temperature between 41 °F and 77 ° F. Before you apply Woodcon, remove dirt, mold, algae, dust and vegetation from the treated area. Shake Woodcon before using and apply evenly over the surface of the wood, without leaving any drops or runners. In a very porous or old / worn surface, it may be necessary to apply a second layer. Apply the second layer before the first layer has dried. After drying, the treated surface is easy to clean with water.
Use how much Woodcon:
Depending on the porosity of the surface of the wood type. 1 liter of Woodcon is sufficient for 8 m2.